| ITEM | Z5000-BF |
| Input | Rated voltage, Frequency | 1PH/3PH AC 220V 50/60Hz;
3PH AC 380V 50/60 Hz |
| Voltage Range | 220V: 170~240V; 380V: 330V～440V |
| Output | Voltage Range | 220V: 0~220V ; 380 V: 0～380 V |
| Frequency Range | 0.10～400.0 Hz |
| Control method | V/F control, Space vector control |
| Indication | Operating status/Alarm definition, interactive guidance; eg, frequency setting, the output frequency /current, rotating speed, fault and so on. |
| Control specification | Output Frequency Range | 0.10～400.00 Hz. |
| Frequency Setting Resolution | Digital input: 0.01 Hz. |
| Analog input:0,1% of maximum output frequency |
| Output Frequency Accuracy | 0.01 Hz. |
| V/F Control | Setting V/F curve to satisfy various load requirements |
| Torque Control | Auto increase: auto raise torque by loading condition; Manual increase: enable to set 0.0~20% of raising torque |
| Multifunctional Input Terminal | 4 multi-function input terminals, realizing functions including 15 section speed control, program running, 4 section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions |
| Multifunctional Output Terminal | 1 multi-function output terminals for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings |
| Acceleration/deceleration Time Setting | 0~999.9 s acceleration/deceleration time can be set individually |
| Other functions | PID Control | Built-in PID control |
| RS485 | Standard RS485 communication function (MODBUS) |
| Frequency Setting | Analog input 0～10V, 0～20мА, can be selected; Digital input: input using the setting dial of the operation panel or RS 485 or UP/DOWN |
| Multi-speed | 4 multi-function input terminals,15 section speed can be set |
| Automatic voltage regulation | Automatic voltage regulation function can be selected |
| Counter | Built-in 2 group of counters |
| Protection function | Overload | 150%, 60s (Constant torque); 120%,60s (variable torque) |
| Over Voltage | Over voltage protection can be set |
| Under Voltage | Under voltage protection can be set |
| Other Protections | Output short-circuit, over current, and parameter lock and so on. |
| Environment | Ambient Temperature | –10℃~40℃(non-freezing) |
| Ambient Humidity | Max. 95% (non-condensing) |
| Altitude | Lower than 1000м. |
| Vibration | Max. 0.5 g |
| Structrure | Cooling Mode | Below 3.7 kW no have fan; Above 5.5 kW Forced air cooling |
| Protective Structure | Below 3.7kw IP 65, 3.7kw and above IP54 |
